User Attendance Messages; User Attendance Errors - Lexmark M52 Series Service Manual

Action
Step 10
Make sure that the HPU controller board is properly installed.
Reseat the cables on the HPU controller board.
Does the problem remain?
Step 11
Check the HPU controller board and its connector pins for damage.
Are the HPU controller board and its connectors free of damage?
Step 12
Make sure that the controller board of the affected optional bin is
properly installed. Reseat all the cables on the controller board.
Does the problem remain?
Step 13
Check the affected controller board and its connector pins for
damage.
Are the bin controller board and its connectors free of damage?
Step 14
Replace the bin controller board. See
controller board removal" on page
Does the problem remain?

User attendance messages

10–32 user attendance errors
10–32 user attendance messages
Error code Description
10.01 Too many vinyl labels printed successively.
10.02 Too many vinyl labels printed successively.
31.40 A toner cartridge smart chip or sensor
communication problem was detected.
31.60 An imaging unit smart chip or sensor
communication problem was detected.
31.80 A fuser smart chip or sensor communication
problem was detected.
"Staple, hole punch finisher
705.
Action
Reduce the vinyl labels printed. Print less than 50
vinyl labels in a row, or print at least one vinyl
label per six plain paper pages.
See
check" on page
See
check" on page
See
page
Diagnostics and troubleshooting
290
Yes
Go to step 11.
Go to step 12.
Go to step 13.
Contact the next
level of support.
Contact the next
level of support.
"Toner cartridge smart chip error service
291.
"Imaging unit smart chip error service
293.
"Fuser smart chip error service check" on
294.
4064
No
The problem is
solved.
Contact the next
level of support.
The problem is
solved.
Go to step 14.
The problem is
solved.