Invalid Tray Configuration Service Check; Too Many Bins Attached Service Check; Too Many Disks Attached Service Check; Too Many Flash Options Service Check - Lexmark T652 Service Manual

Invalid Tray Configuration service check
Action
Step 1
Place the RFID option above all other optional input trays or place
at least one optional input tray under it.
Does the problem remain?
Step 2
Reinstall the RFID firmware card, RFID interface card, RFID cable,
and RFID option. Go to
removal" on page 402.
Step 3
Replace the RFID option. Go to
removal" on page 402.

Too Many Bins Attached service check

Action
a
Turn off the printer, and unplug it.
b
Remove the excess bins.
c
Plug in the printer, and turn it on.
Does the problem remain?

Too Many Disks Attached service check

Action
a
Turn off the printer, and unplug it.
b
Remove the excess disks.
c
Plug in the printer, and turn it on.
Does the problem remain?

Too Many Flash Options service check

Action
a
Turn off the printer, and unplug it.
b
Remove the excess flash options.
c
Plug in the printer, and turn it on.
Does the problem remain?
"RFID UHF option installation and
"RFID UHF option installation and
Diagnostic information
Yes
Go to step 2.
Go to step 3.
Contact next level of
support.
Yes
Contact next level of
support.
Yes
Contact next level of
support.
Yes
Contact next level of
support.
191
4062
No
Problem is solved.
Problem is solved.
Problem is solved.
No
Problem is solved.
No
Problem is solved.
No
Problem is solved.