Installing The Lan Driver; Installing The Lan Driver (Windows Server 2003 X64) - Fujitsu PRIMERGY RX300 S3 User Manual

Chapter 4 Manual OS Installation

4.3 Installing the LAN Driver

This section explains the procedure for installing the driver.
In addition to the case where the OS is installed manually, the driver must be installed
when a LAN card is added.

4.3.1 Installing the LAN Driver (Windows Server 2003 x64)

The LAN driver installation procedure differs depending on whether the network adapter was
recognized during the OS installation.
For the following LAN cards, the network adapters are recognized when the cards are mounted during
OS installation.
• PG-1862
• PG-1882(L)
• PG-1892(L)
1
Click [Start] → [Administrative Tools] → [Computer Management].
2
Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
(Window example)
When a recognized network adapter is present, [Network adapters] appears.
126
Recognized
network adapter
Unrecognized
network adapter