Installing the new OCP module
▶ Install the OCP module, see
Concluding steps
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ Inform the customer about the changed MAC addresses, see
MAC/WWN/GUID and SAS addresses" on page
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page
104.
▶
"Configuring LAN teaming" on page
9.6
Expansion cards in standard PCIe slots
9.6.1
Installing an expansion card
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
RX2540 M6
Expansion cards and backup units
"Installing the OCP module" on page
65.
69.
113.
52.
Upgrade and Maintenance Manual
69.
107.
Hardware: 5 minutes
Software: 5 minutes
87.
53.
56.
251.
"Looking for
52.
255