Figure 188: Removing the SFP+ transceiver module
▶ Pull the SFP+ transceiver module out of its socket connector.
▶ Attach the protective cap to the SFP+ transceiver module.
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
9.5
Expansion cards and riser cards
9.5.1
Installing an expansion card
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
TX1330 M4
Expansion cards and backup units
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
299