Oil Cooler Removal; Oil Cooler Installation - Honda NSA700A DN-1 2009 Service Manual

OIL COOLER
REMOVAL
Remove the left side cover (page 3-15).
Drain the engine oil (page 4-12).
Drain the coolant fro m the system (page 7-6).
Remove the oil filte r (page 4-12).
Loosen the band screws, then disconnect the water
hoses from the w ater pump.
Remove the bolt, w asher and oil cooler.
Check the oil cooler fo r damage.
INSTALLATION
Install a new O-ring into the oil cooler groove.
Install the oil cooler to the crankcase by a ligning the
oil cooler groove w ith the crankcase boss.
LUBRICATION SYSTEM
WATER HOSES
O-RING
)-RING
BAND SCREWS
OIL COOLER
BOLTA/VASHER