Honda NSA700A DN-1 2009 Service Manual page 325

DTC 34-1 (BOOSTER CIRCUIT)
1. Failure Reproduction
Reset the self diagnosis memory data fro rr the
TCM (page 11-24).
Perform the HFT initialization procedure (page 11-
93).
Test-ride the motorcycle, then check the HDS.
Is DTC 34-1 in d ica te d ?
- Replace the TCM with a new one, and
YES
recheck (HFT initialization procedure:
page 11-93).
- Intermittent failure.
NO
DTC 36-1 (SUB POWER RELAY)
1. TCM Fuse Inspection
Turn the ignition switch OFF.
Remove the pillion seat (page 3-4).
Remove the TCM fuse 10 A.
Inspect the TCM fuse 10 A.
Is the fuse b lo w n ?
YES - Replace the fuse with a new one.
- GO TO STEP 2.
NO
2. TCM Sub Power Input Voltage Inspection
Install the TCM fuse 30 A.
Disconnect the TCM 33P (Black) connector.
Measure the voltage between the wire harness
side TCM 33P (Black) connector terminal and
ground.
Connection: A25 (Black/red) (+) - Ground (-)
Does th e b a tte ry voltage e x is t?
- GO TO STEP 3.
YES
- Open circuit in Black/red wire.
NO
3. Failure Reproduction
Reset the self diagnosis memory data from the
TCM (page 11-24).
Perform the HFT initialization procedure (page 11-
93).
Test-ride the motorcycle, then check the HDS.
Is DTC 36-1 indicated?
- Replace the TCM with a new one, and
YES
recheck (HFT initialization procedure:
page 11-93).
NO - Intermittent failure.
TCM 33P (Black) CONNECTOR
(Wire side of female terminal)
\
.
n
x
j| t
I I
A25
HFT
FUSE 10 A
11-49