Honda NSA700A DN-1 2009 Service Manual page 357

Compress the return spring using special tools.
Compressing the
return spring more
Remove the snap ring.
than necessary w ill
cause loss o f
tension.
Remove the special tools.
Remove the snap ring, spring retainer and return
spring.
Place a shop towel over the piston.
Position the clutch drum w ith the piston down and
Do not use high
apply small squirts of air pressure to the oil hole to
pressure air o r bring
remove the piston.
the nozzle too close
to the oil hole.
Remove the piston and O-rings.
SNAP RING
CLUTCH DRUM
OIL HOLE
O-RINGS
HFT
I
SNAP RING
SPRING RETAINER
RETURN SPRING
CLUTCH PISTON
CLUTCH PISTON
11-81