Honda NSA700A DN-1 2009 Service Manual page 308

HFT
3. EOP Sensor O utput/Ground Line Open Circuit
Inspection
Turn the ignition switch OFF.
Disconnect the TCM 33P (Black) connector.
Check for continuity between the wire harness
side EOP sensor connector terminals and ECM
connector terminals.
Connection: A15 (Yellow/black) - Yellow/black
TOOL:
Test probe
Is there c o n tin u ity ?
YES
NO
11-32
A27 (Green/black) - Green/black
07ZAJ-RDJA110
- Replace the TCM with a new one, and
recheck (HFT initialization procedure:
page 11-93).
- • Open circuit in the Yellow/black wire.
• Open circuit in the Green/black wire.
TCM 33P (Black) CONNECTOR
(Wire side of female terminal)
A15
A27
EOP SENSOR 3P CONNECTOR
(Wire side of female terminal)
Yellow/
black