Oil Pump Removal; Oil Pump Mounting Bolt - Honda MBX50 Workshop Manual

LUBRICATION
NOTE
Before removing the oil pump, clean the oil
pump and crankcase.
Remove the carburetor (Page 4-3).
Disconnect the oil pump control cable.
Remove the left crankcase cover. (Page 8-3).
Remove the bolt and screw attaching the oil pump.
Disconnect the oil tube from the oil pump, and
pinch the end of the oil tube to prevent oil from
flowing out.
Disconnect the oil pass tube from the inlet pipe.
NOTE
Use care not to allow oil to flow out of the
oil pass tube.
Remove the oil pump from the crankcase.
2-5

{1) OIL PUMP MOUNTING BOLT

(3) OIL PASS TUBE
(1) OIL TUBE
(2) TUBE CLIP
(2) INLET PIPE
{2) SCREW
(4) OIL TUBE
(1) OIL PUMP
(3) OIL PASS TUBE