Pair Control Solenoid Valve - Honda NSA700A DN-1 2009 Service Manual

FUEL SYSTEM (PGM-FI)

PAIR CONTROL SOLENOID VALVE

REMOVAL/INSTALLATION
Remove the air cleaner housing (page 6-50)
Remove the PAIR solenoid valve fro m the stay.
Disconnect the PAIR solenoid valve 2P (Black) con­
nector.
Disconnect the air suction and air supply hoses
fro m the PAIR solenoid valve.
Installation is in the reverse orde r o f removal.
INSPECTION
Remove the PAIR solenoid valve (page 6-72).
Check that air does not flo w (A) to (B) when a 12 V
battery is connected to the PAIR control solenoid
valve term inals. A ir should flo w (A) to (B) when
there is no voltage applied to the PAIR valve te rm i­
nals.
M easure the resistance between the term inals of
the PAIR control solenoid valve.
STANDARD: 20 - 24 Q (20 C/68°F)
If it is o u t of the standard, replace the PAIR solenoid
valve.
2P CONNECTOR
(Solenoid valve side o f male term inals)