OIL LEVEL SWITCH RELAY
R E M O VA L/IN STALLATIO N
Remove the pillion seat (page 3-4).
Disconnect the oil level switch relay connector and
remove the oil level switch relay.
Installation is in the reverse order of removal.
INSPECTION
Remove the oil level switch relay (page 11-111).
Connect an ohm meter to the oil level switch relay
connector terminals.
Connect a 12 V battery to the following oil level
switch relay connector terminals as shown.
There should be continuity only when the 12 V bat
tery is connected.
Revised: December 2010. 2009 NSA700A
©2010 American Honda Motor Co.. Inc. - A ll Rights Reserved • MSV 13476 (1011)
OIL LEVEL SWITCH RELAY
OIL LEVEL SWITCH RELAY
HFT
11-111