Honda NSA700A DN-1 2009 Service Manual page 393

5. FI/IGN/PUMP Relay inspection 2
Turn the ignition switch OFF.
Jump the FI/IGN/PUMP relay connector term i­
nals.
Turn the ignition switch ON and engine stop
switch "O".
Measure the voltage between the TCM 33P
(Black) connector and ground.
Connection: A3 (+) - Ground (-)
Is there b a tte ry voltage?
YES - Inspect the FI/IGN/PUMP relay (page 6-
68
)
NO - Open circuit in Black/white wire
FI/IGN PUMP RELAY TERMINAL
x
Rlack/White
JUMPER WIRE
TCM 33P (Black) CONNECTOR
(Wire side of female terminal)
HFT
Red/yellow
11-117