Honda NSA700A DN-1 2009 Service Manual page 229

ENGINE REMOVAL/INSTALLATION
Install the rear engine hanger plates and bolts.
Tighten the bolts to the specified torque.
TORQUE: 26 N-m (2.7 kgf-m, 19 Ibf-ft)
Install and tighten the rear engine m ounting bolt
and nut to the specified torque.
TORQUE: 39 N-m (4.0 kgf-m, 29 Ibf-ft)
Connect the ground cable and lighten the bolt.
Connect the w ater hose and tighten the hose band
screw securely.
8-10
HANGER PLATES
BOLTS
MOUNTING BOLT
GROUND CABLE
MOUNTING NUT
BOLT
0 - 1 . 0 mm
(0 -0 .0 4 in)
m