Final Drive Removal - Honda NSA700A DN-1 2009 Service Manual

FINAL DRIVE

FINAL DRIVE REMOVAL

Drain the final drive oil (page 4-18).
Remove the following:
- Rear wheel (page 16-6).
- Rear brake caliper (page 17-33)
- Rear brake disc (page 17-19)
- Rear parking brake (page 17-36)
Remove the four mounting nuts and final drive gear
case assembly from the swingarm.
Remove the drive shaft from the gear case by gently
turning the drive shaft and pulling it.
Remove the spring, oil seal and stopper ring from
the drive shaft.
INSPECTION
Check the splines of the drive shaft fo r damage or
wear.
If the splines of the drive shaft are damaged, check
the universal jo in t splines also.
FINAL DRIVE GEAR
CASE ASSEMBLY
DRIVE SHAFT
OIL SEAL
STOPPER RING
SPRING