Detaching And Deleting A Gateway - Altigen ACM 6.7 Administrator's Manual

To add a gateway to the list:
1. Click the Add button.
2. Set this gateway's unique number. Each gateway in the system must have a unique
identifying number.
3. Specify a name for the gateway that identifies it to you.
4. Select the type: Media Server or Gateway.
5. Enter the IP address of the gateway.
6. Create a password for this gateway. The password is used for access to the Gateway
Configuration Tool for the gateway.
After you add a gateway to the list, you can attach it to the MAXCS system. Also, you
may have disconnected a gateway that has already been attached. In either case, you
can attach it in the Softswitch Component Configuration window.
To attach a gateway to the MAXCS system:
1. Select the gateway you want to attach.
2. Click the Attach button.
It takes 2-5 minutes to attach a gateway, depending on how many boards are in the
gateway. If a "Failed" message appears, you may have entered an incorrect IP
address or password, or the gateway may already be attached.

Detaching and Deleting a Gateway

You can detach a gateway without shutting down the MAXCS system.
Caution!
Always try to detach a gateway when call activity in the system is low. If
resources are being used in one of the gateways, ongoing calls may be
dropped.
To detach a gateway from the MAXCS system:
1. Select the gateway you want to detach.
2. Click Detach. You are asked for confirmation.
3. Click Yes to confirm. A message appears telling you that the detachment was
successful, and the Status field of the gateway reads Disconnected.
To delete a gateway from the Softswitch Component Configuration
window:
First detach the gateway. Then select the gateway you want to delete, and click the
Delete button. The gateway disappears from the window. You can add it back again, if
you want, by using the Add button.
Detaching and Deleting a Gateway
MAXCS ACM 6.7 Administration Manual 75