Application Information; Readying The Application - Altigen ACM 6.7 Administrator's Manual

Operator—select an operator from the drop-down list.
•
Important:
If the failover setting for the application extension is set to an extension, and
the extension is RNA or busy, the call will follow the extension's RNA or busy
call handling.

Application Information

Additional information can be described in the App Information fields. If desired, enter
the appropriate information in the fields for Application Source, Spec Doc Location,
Designed by, Implemented by, Implementation Date, Revision Number and
Revision Date.

Readying the Application

If a third-party application is connecting to this extension, make sure the application is
properly set to log into the application extension. If the third-party application is logged
in, the status shown in Figure 52 on page 112 changes to "connected."
Application Extension Setup
MAXCS ACM 6.7 Administration Manual 113