Configuring The Virtual Mobileextsp Board - Altigen ACM 6.7 Administrator's Manual

Double-clicking a T1/E1 channel group opens the channel group configuration dialog
•
box. For information on configuring in this dialog box, see "T1 and E1 Configuration"
on page 145. This is available on T1 or E1 channel groups only.
In the channel group configuration dialog box, click the Protocol button to open the
•
Protocol Configuration dialog box. For information on configuring protocol, see
"Setting up Channels on the Triton T1/E1 Board" on page 149.
Double-clicking a channel in the Channel Mapping List opens the appropriate
configuration dialog box for that channel.
For information on configuring the T1/E1 trunk, see "Triton T1/E1 Trunk Properties"
•
on page 125.
• For information on configuring the Triton Analog Trunk, see "Triton Analog Trunk GS/
LS Properties" on page 128.
For information on configuring a Triton Analog Line, see "Triton Analog Station Line
•
Properties" on page 190.
In the main Board Configuration dialog box for the MAX 1000/2000 board (see Figure 88
on page 164) clicking the Board Configuration button opens the following dialog box.
Figure 89. MAX 1000/2000 Board Configuration window
This dialog box displays the board serial number, top access card serial number, bottom
access card serial number, DSP clock, board ID, physical ID, and logical ID. You can
choose to configure the board as either T1 or E1, then click OK. Additional steps are
needed to further configure the CAS or PRI protocol in the Protocol Configuration
window, shown in Figure 77 and Figure 78.

Configuring the Virtual MobileExtSP Board

A simulated physical board—MobileExtSP board—is created in the Softswitch server
when you install the MAXCS system. This single MobileExtSP board handles all mobile
extensions, including those located in other gateways in a multi-gateway system.
Configuring the virtual MobileExtSP board is discussed on page 232 in the chapter
"Mobile Extension Configuration."
Configuring the Virtual MobileExtSP Board
MAXCS ACM 6.7 Administration Manual 165