Set Up Phone Dialer - Altigen ACM 6.7 Administrator's Manual

Setting Up the Client
If they are not started, right-click on each service and choose Start. Have
them start automatically in the future by right-clicking the service, choosing
Properties, and selecting Automatic as the Startup Type.
Also verify that the TAPI PROXY service is started on the AltiGen server.
If the two services are started, then remove AltiGen (TM) Communications
Service Provider from the Phone and Modem Options dialog box (see
Figure 179), and then add it back. Repeat the verification of the AltiGen
server IP, extension, and password information if your extension information
is not shown properly in AltiGen TAPI Device Detect (see Figure 179).

Set Up Phone Dialer

1. Launch Phone Dialer: From Windows 2000, select Start > Programs >
Accessories > Communication. From Windows XP, go to Start > Run, type
Dialer.exe
2. In the Phone Dialer, select Edit > Options.
3. In the Preferred line for calling section, select Phone.
396
MAXCS ACM 6.7 Administration Manual
, and click OK.