Table of Contents
Advertisement
To set up a Paging Group:
1. In the Paging Group configuration window, below the Group List, click the Add
button.
2. Enter a number for the paging group in the Add New Group dialog box.
3. Check the Global Group check box if you want this group to be visible to other
gateways. Click OK.
4. In the Group Information field, type in the following:
•
First Name and Last Name of the paging group, each with a maximum of 32
characters.
•
Password for the paging group. The default is the system password set on the
Number Plan tab of the System Configuration window.
•
Description for the paging group.
To add members to a Paging Group:
1. On the Group Member tab of the Paging Group Configuration window, select the
desired extension(s) in the Not Member list. Use Shift+click or Ctrl+click to select
several extensions from the list.
2. Click the Add button to move them to the Member list.
Figure 122. Paging Group Configuration, Group Member tab
256
MAXCS ACM 6.7 Administration Manual
Advertisement
Table of Contents
Troubleshooting
