Managing Gateways - Altigen ACM 6.7 Administrator's Manual

Managing Gateways

Figure 27. Multi-Gateway Softswitch deployment using OFFICE3G server
Note:
MAXCS and gateway servers have to be on the same LAN. Connecting a gateway
from a remote site to the MAXCS site through a WAN connection is not supported.
The WAN network delay and latency may cause synchronization signal failure
between MAXCS and the gateway.
Note: An AltiGen Gateway license is required to set up a gateway.
Managing Gateways
Whether you are using multiple gateways or one gateway, you will perform gateway
management functions in the Softswitch Component Configuration window.
The Softswitch Component Configuration window lists each gateway in your system, its
ID, name, and type (media server or gateway), status, IP address, password, country,
and how many IP phones are assigned to the gateway as a home gateway. Use this
window to:
• Add and delete a gateway
Attach and detach a gateway
•
• Change a gateway name, IP address, password, country
• Enable Media Server on the Softswitch
• Set TDM Bus mode for a gateway
Set CT-Bus clock for a gateway
•
To open the Softswitch Component Configuration window, select System > Softswitch
Component Management.
72
MAXCS ACM 6.7 Administration Manual