Monitor Status, Configure Addresses For Enterprise And Vm Servers - Altigen ACM 6.7 Administrator's Manual

Monitor Status, Configure Addresses for Enterprise and VM Servers

Figure 151. Enabling VM server NAT support
1. Check Enable VM Server NAT Support.
2. Check Enable Virtual IP Addresses Support.
3. Click the Advanced button.
4. Double-click the VM Server IP address to configure the address.
Monitor Status, Configure Addresses for Enterprise
and VM Servers
You can monitor the status and configure the addresses of the Enterprise server and the
Voice Mail server. In MaxAdministrator, select System > Softswitch Component
Management > Applications Server tab.
360
MAXCS ACM 6.7 Administration Manual