Altigen ACM 6.7 Administrator's Manual page 45

Error Message
Unable to add AltiServ path to the
system.
Failed to upgrade AltiServ databases.
System Requirements and Installation
Solution
Manually append c:\AltiServ\exe (if MAXCS is
installed on c: drive) to your system environment
path (through Control Panel > System >
Advanced tab > Environment Variables >
System Variables) after finishing the MAXCS
installation but before restarting your system
The previous database may be corrupted. Restore
the last, known working database and try again.
If error persists, contact your Authorized AltiGen
Dealer.
MAXCS ACM 6.7 Administration Manual 31