Automatic Call Distribution Features - Altigen ACM 6.7 Administrator's Manual

System and Station Speed Dial- allows programming of frequently used telephone
numbers for speed dialing. Up to 60 system speed numbers can be programmed. Up to
20 station speed numbers can be programmed for each extension.
System Backup and Restore - allows back up of configuration data and voice mail
boxes, based on a configured schedule.
Transfer Caller to AltiGen Voice Mail System - allows user to transfer outside caller
into the AltiGen Voice Mail System by pressing FLASH # 40 while connected to the
caller.
Transfer Caller to AA - allows a user to transfer a call to an AA by pressing FLASH
#15 and then the 2- or 3-digit AA number.
Virtual Extensions - an extension that is not associated with a physical port, but allows
access to the AltiGen Voice Mail System features and telephone sharing.
Workgroup Call Pickup - allows agent or supervisor to pick up a specific call in queue.

Automatic Call Distribution Features

Automatic call distribution (ACD) features include:
Advanced Queue Management Application - enables advanced queuing options:
One-level AA menu selection from queue
•
Advanced queue overflow for configuration of overflow conditions and actions
•
After Hours Handling for Workgroups - a workgroup can be assigned a Business
Hours Profile through MaxAdministrator. Also, after hours routing decisions can be
configured for each day of the week. When a call is forwarded to this workgroup after
hours, the call is routed automatically, based on the routing decision for that day of the
week.
Agent Login/Logout - allows huntgroup/ workgroup members to log in and out of a
group so that incoming calls bypass the workgroup member (agent) who has logged out
and the call is automatically routed to other login agents.
Agent Logout Reason Codes - allows a workgroup member to enter a reason code
when signing off. Up to 20 reason codes may be defined.
Agent Set to Not Ready When RNA - when a workgroup call rings an agent and is not
answered, this feature automatically sets the agent state to Not Ready.
Agent Auto Logout When RNA - when a workgroup call rings an agent and is not
answered, this feature automatically sets the agent state to Logout for that particular
workgroup.
Call Queuing - places caller in a queue to wait until an ACD group member becomes
available.
Call Queue Announcement - before a call enters a workgroup queue, the system
announces the expected wait time or call queue length to the caller.
Call to Queue Alert - agents can be alerted via a beep and a screenpop when a call
enters the workgroup queue.
Distinctive Ringing for Workgroup Calls - allows workgroup incoming calls to use a
different ringing cadence from normal calls.
Inter Call Delays - can be used to set delays before the system sends the next call to
an extension after the agent finishes an outbound call or other non-workgroup call
activity.
MAXCS ACM 6.7 Administration Manual 7
System Features