Altigen ACM 6.7 Administrator's Manual page 331

For a single-system installation without a Domain Master, this first method is
•
recommended. From MaxAdmin, select VoIP > Enterprise Network
Management. Enterprise Manager opens without a login dialog box.
For multisite VoIP domain management, from the Windows Start menu, select All
•
Programs > MAXCS > Enterprise Manager. A login screen appears. (With this
method you can log in to the Domain Master from any member system or remote
desktop.)
User name
DomainAdmin
(Logging in as DomainAdmin
gives you rights to change the
entire Enterprise Manager
configuration.)
Admin@domain master IP
address
(A Site Admin who logs into the
Domain Master in this way has
the same rights as
DomainAdmin.)
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.)
WARNING! If your MAXCS system is using dynamic IP addressing, you will see the
following warning message when launching Enterprise Manager.
Please check the Internet Protocol (TCP/IP) Properties of your server
NIC interface and assign a fixed IP address to this server.
Password
Default=22222. You can
change the password in
Enterprise Manager.
Note: This password is not
the same as the MaxAdmin
password.
Enter MaxAdmin password
Enter the MaxAdmin
password for the member
server
MAXCS ACM 6.7 Administration Manual 317
Opening Enterprise Manager
Login Domain Via Server
Enter the domain master's IP
address
Enter the domain master's IP
address
Enter the member server's IP
address