Altigen ACM 6.7 Administrator's Manual page 18

Overview
Call Forwarding and Remote Call Forwarding - sends all calls to another extension,
to a workgroup/hunt group, or to an external telephone number. This allows users to
redirect their calls to another location, such as home or a branch office. Call Forwarding
can be set up either at the source extension or at the destination extension on the
system (Remote Call Forwarding). There is 10-hop limit on forwarded calls.
Call Park and Pick Up (Station) - users can park calls at one station to be picked up
at another station. Up to 50 calls may be parked at one station simultaneously. Calls
parked to a group are protected. Only group agents or the person who parked the call
can pick it up.
Call Park and Pick Up (System) - users can park calls at the system to be picked up
at another station. An ID is assigned to the call when parked. The user can pick up a
parked call by entering a feature code and the Parked ID.
Call Park Ring Back Identification to Operator - when parked calls are not picked
up, the operator is rung.
Call Restrictions - restricts users from dialing specific long distance area codes and
phone numbers. Reduces the risk of toll fraud.
Caller ID - fully supports the Bellcore Caller ID standard and displays alpha and numeric
caller ID and name on a standard analog telephone with a display. Up to 64 characters
are transmitted and displayed. If your local exchange carrier provides enhanced caller
ID, such as caller name, this information will also be displayed.
Caller ID Routing - the system administrator can define Caller IDs in a routing table
and set different routing options.
Centrex Transfer - allows the user to transfer or forward calls to an external telephone
number. Once the transfer is complete, the trunk lines are released.
Conference Call (Station) - the system supports conference calls with up to 6 parties,
including the dialing extension. You can speak privately to each person before adding
the person to the conference. The conference initiator can mute conference members
from MaxCommunicator and MaxAgent.
Conference Call (MeetMe) - multiple parties can call into a pre-scheduled conference
bridge to join a conference call. The conference host can mute or drop conference
members.
Configurable Phone Display - the system administrator can configure the Caller ID,
Name, or DNIS number displayed on a phone set.
Conversation Recording - an extension user can record a conversation to voice mail
or, with the appropriate license, to a central folder.
Dialed Digit Translation - allows the administrator to select a single dialed digit that
can be assigned to route a call to any destination. First Digit Translator allows the
administrator to select a single dialed digit that can be assigned to route a call to any
destination. Extension Dialed Digit Translator allows predefined dialed digits by an
extension to be translated into a different dialing string. The digit manipulation option
allows you to remove or add digits to a number dialed by the extension.
Dial Last Caller - allows user to dial the last caller using #69.
Direct Inward Dial (DID) - allows an incoming trunk call to directly access an
extension without IVR intervention.
Note:
If your local exchange carrier provides DID service, DID calls will automatically
be steered to the appropriate destination.
Directory Name Announcement - the extension user's directory name will be
announced to the caller before the call rings to a phone.
4
MAXCS ACM 6.7 Administration Manual