Adding And Deleting Caller Id Route Entries; Defining Caller Id Routing - Altigen ACM 6.7 Administrator's Manual

Caller ID Routing
In order to locate an entry in the Caller ID table for an incoming call, a full match is
required.
To access Caller ID routing, click the Caller ID Routing tab in the In Call Routing
Configuration window.
Figure 90. In Call Routing window, Caller ID Routing tab

Adding and Deleting Caller ID Route Entries

To add entries to the Caller ID routing table, click the Add button. In the dialog box that
appears, type in a Caller ID Number and a descriptive Caller ID Name, then click OK.
The number and name entries have the following requirements:
The Caller ID Number field allows only 0-9, "-" (hyphen), and "*" (asterisk). For
•
example, both 5102529712 and 510-252-9712 are acceptable.
• The Caller ID Name is descriptive and optional; it can be used to remind you about
the nature of the number and routing. For example, you might give the 2529712
number the name "Tech Support."
To delete an entry, select it in the Caller ID number list, then click Delete.

Defining Caller ID Routing

After adding an entry, you define it by first selecting it in the list. When you select an
entry, its name and other defined attributes, if any, appear in the fields of the tab. You
can edit any of these attributes.
For each number, you can set routing for three distinct time periods defined in the
Business Hours tab (see "Setting Business Hours" on page 53):
168
MAXCS ACM 6.7 Administration Manual