Setting The Line Properties - Altigen ACM 6.7 Administrator's Manual

Setting up Extensions

Setting the Line Properties

For a physical extension, you can configure hardware options on the port used for the
extensions. To do so, select the extension number in the list of extensions, then click the
Line Properties button to open a dialog box that is specific to the board used for the
extension.
Triton Analog Station Line Properties
If you select a Triton Analog Station Board extension and click the Line Properties
button, you'll see the Triton Analog Station Line Properties dialog box.
You can also access this window by double-clicking a span in Channel Mapping List of
the Triton Analog Station Board configuration window.
Figure 96. Triton Analog Station Line Properties dialog box
Configure the following hardware extension-specific features:
Parameter
Caller ID Signal
Format
Message Waiting
Signal Type
190
MAXCS ACM 6.7 Administration Manual
Description
Message format with which to send Caller ID information:
• None
• SDMF—Single Data Message Format for supporting and
sending a single data type, such as phone numbers.
• MDMF—Multiple Data Message Format for supporting and
sending multiple data types, such as name and number
information. (Default for US/Canada installation.)
• DTMF—Dual Tone Multi-Frequency, composed of high and
low frequencies, for touch tone dialing.
Type of Message Waiting indicator for the phone set:
• None
• FSK/SDMF—Frequency Shift Keying/Single Data Message
Format indicator.
• FSK/MDMF—Frequency Shift Keying/Multiple Data
Message Format indicator. (Default for US/Canada
installation.)