Table of Contents
Advertisement
User button displays information about extensions in the VoIP domain and lets you
•
change an extension to global or local and relocate an extension.
•
Department button lets you define departments in the VoIP domain and assign
extensions to departments.
•
Global LCR button lets you add E.164 number patterns and specify source and
target sites.
Tabs Displayed with the Servers Button
•
Information tab displays information about the selected site and lets you configure
a PSTN number for global extension rerouting as a failover when the TCP/IP network
is down. You may also assign an alternate server to which to redirect global AltiGen
IP phones when their primary server is down.
•
IP Networks tab defines IP networks and the bandwidth information for an MAXCS
site. Bandwidth usage control for Internet and intranet can be set up here. If the
bandwidth usage exceeds the maximum setting, the call will not be established.
•
IP Dialing Table tab defines the IP dialing table for a MAXCS site. Specified
information here includes a codec profile and a protocol (SIP or H323) for the
communication from this site to the selected site.
•
IP Codec tab lets you specify an inter-gateway codec and define IP device ranges
to which you can assign a codec profile.
•
Number Plan tab displays the number plan information that is set up in MaxAdmin,
System Configuration window, Number Plan tab.
Changing the Enterprise Manager Password
Only a person with DomainAdmin rights can change the Enterprise Manager password.
To change the password, click the Password button at the top of the Enterprise
Manager window.
Enter the old password, and the new password. Confirm the password, and click OK.
Setting VoIP Codec Profiles
The codec setting is profile-based. For different IP addresses and protocols, a different
preferred codec can be used. Each codec profile can have its own codec (G.711, G.723,
G.729), packet length, and jitter buffer. The codec profile can be assigned to connectivity
with a remote server, IP phone or other VoIP device.
By default, the following IP address ranges (private IP addresses) will use G.711 codec:
•
192.168.0.0 to 192.168.255.255
•
172.16.0.0 to 172.31.255.255
Setting VoIP Codec Profiles
MAXCS ACM 6.7 Administration Manual 319
Advertisement
Table of Contents
Troubleshooting
