Overview Of Enterprise Manager - Altigen ACM 6.7 Administrator's Manual

Overview of Enterprise Manager

When multiple systems are added to the VoIP domain, all member systems need to
have both Route Access Code and IP Trunk Access Code configured. If one or
more member systems are not configured properly, a message opens.
Multisite routing may fail if Route Access Code and IP TrunkAccess Code are not
configured.
Overview of Enterprise Manager
Upon successful login, Enterprise Manager opens.
Change Password
Display Servers
Click a tab to view or configure settings on that tab. Information on a tab is related to
the selected server. Click buttons in the toolbar to perform configuration tasks. Click a
column heading to sort by that column.
Configuration Buttons
• Servers button displays the VoIP domain name, servers in the system, and server
ID length. Lets you add/remove servers and change the VoIP domain master. Lets
you re-route outgoing calls of global extensions and redirect AltiGen IP phones.
Displays the configuration and informational tabs listed in the next section.
• Codec button lets you configure individual codec profiles—silence suppression,
codec, jitter buffer range, RTP packet length, DTMF delivery, enable/disable SIP
early media, and SIP transport.
318
MAXCS ACM 6.7 Administration Manual
Configure Codec Profiles
Configure Users, Departments
Configure Global Least Cost Routing