Altigen ACM 6.7 Administrator's Manual page 399

This entry consists of a number prefix and n number of x characters (for
•
example, 4420xxxxxxx).
• To determine the telphone number, UM will append the last n-digits from the
telephone number that is specified in the directory to the prefix that is
specified.
3. On the Dialing Rule Groups tab, add dial rules for in-country/region and international
calls that will be placed by UM-enabled users. Each dialing rule entry that is defined
on the dial rule group determines the types of calls that users within a specific dial
rule group can make.
Figure 173. Adding Dial Rule entries in the Dialing Rule Groups tab
For a Dialing Rule Entry (see Figure 173), the following are required:
Name - Select a name of an existing dialing rule or, if you want to create a dialing
rule, type the name of the dialing rule (up to 32 characters, text characters only).
This is the display name for the dialing rule that will be displayed in the Exchange
Management Console.
Number Mask - Define the number mask for the dialing rule. A number mask is
used to define the telephone number format that a Unified Messaging server will use
to determine what outgoing telephone number it will dial for a user. When an
outgoing call is made to a number that is matched by the number mask on the
dialing rule, the UM server will substitute the digits that are matched into the dialed
number. It will then use the digit string from this match to make the outgoing call.
An example of a valid number mask is 91425xxxxxxx. This field can contain only
numbers and the letter 'x'.
Dialed Number - Define the dialed number for the dialing rule. The dialed number
is used to determine the actual dial string that is sent to the IP gateway. This number
Configuring for Out Calling from UM
MAXCS ACM 6.7 Administration Manual 385