Redundant System Installation; Installing Maxadmin On A Network Client - Altigen ACM 6.7 Administrator's Manual

Gateway—Select this option to install gateway service to an AltiGen IP gateway.
•
The supported gateway platforms are:
– OFFICE3G server
MAX2000iG (gateway-only MAX server with redundant power supply and RAID
–
hard drive)
Note: Do not install gateway service to MAX1000 or MAX1000R server.
When installing Gateway service to an OFFICE3G server, remove Triton
Resource and MeetMe Conference boards. Softswitch server will not use these
boards as conference/barge-in resources.
If you select Gateway, the next screen requires you to assign an ID to the gateway.
For detailed instructions on installing and upgrading MAXCS, AltiGen Dealers should refer
to the Knowledge Base, available from the AltiGen Dealer Web Site, at https://
dealer.altigen.com.

Redundant System Installation

These are the components in a redundant system installation.
"Redundancy Configuration" on page 351 gives details on configuring for redundancy.
However, because of the variations of redundancy setup (depending on your system),
please consult with AltiGen before installing a redundancy system.

Installing MaxAdmin on a Network Client

MaxAdministrator can be installed on a client workstation, providing the ability to
manage the MAXCS server remotely. The system running MaxAdministrator and the
MAXCS server must be on the same Windows domain.
When you install MaxAdmin on a machine that is not a MAXCS server, it does not contain
the switching, SMTP/POP3 server, messaging agent, AltiBackup, and Exchange
integration services that are included in the full MAXCS installation. Remote MaxAdmin
does not utilize the System Data Management or Shutdown Switching Service functions
on the MAXCS system.
System Requirements and Installation
MAXCS ACM 6.7 Administration Manual 29