Adding A Server To A Voip Domain - Altigen ACM 6.7 Administrator's Manual

Working with Servers in the Domain
Parameter
Domain Name
Server ID Length
Global Server Location
Changing the Server ID Length
The Server ID is used for the following two purposes:
• Identifying member systems in the VoIP domain
• Mapping to a remote system's IP address in the IP dialing table for system-to-system
dialing
Depending on the number of systems that will be added to the VoIP domain and the
number of entries in the IP dialing table, the Server ID Length can be set to 1, 2, or 3
digits.
Caution! The Server ID Length can be changed. However, if this number is changed,
the server IDs are all altered. If you increase the length, the number 0 is added
to the front of the server IDs. For example, if you change the length from 2 to
3, original ID 02 and 27 will become 002 and 027 respectively. If you change
the length from 3 to 2, the original IDs 112 and 311 will become 12 and 11. It
is advisable to keep the original length. If you are not sure about future
expansion, using a 3-digit length is advised.

Adding a Server to a VoIP Domain

Important:
Before you add a server to the domain, you need to make sure that
the System ID (specified in MaxAdmin, System Configuration tab) is
not the same as another member server's System ID. Enterprise
Manager will use the System ID to build a unique identifier in the
multisite database. Once a server is joined to a domain, you cannot
change the System ID in MaxAdmin.
To add a server to a VoIP domain
1. Click the Add button in the Global Server Location panel.
334
MAXCS ACM 6.7 Administration Manual
Description
The name of the VoIP domain.
Length is from 1-3. See "Changing the Server ID Length" on
page 21 for detailed information.
Displays the ID, Name, and Status (active/inactive) of the
servers in the VoIP domain.
Master—One Domain system must be assigned as Domain
Master to propagate configuration data to member MAXCSs. The
master acts as a central server to accept the connection,
synchronize change from one site to the other sites, and
authenticate users.