Configuring For A Multilingual System - Altigen ACM 6.7 Administrator's Manual

Configuring for a Multilingual System

To configure MAXCS as a multilingual system, select System > Multilingual
Configuration. The Multilingual Configuration screen opens to the Language tab. Here
you will add references to the language directories you created. These are the directories
that contain phrases in other languages.
Figure 38. Multilingual Configuration, Language tab
When you first run MAXCS, only the default language is listed in the Multilingual
Configuration screen, and the description of the default language is displayed as Default
Language. Each language added to the table will have a formal name, a description, a
system phrase directory (LangDir_X), and a custom phrase directory
(LangCustomDir_X), as shown in Figure 38.
To add a language:
1. Click the Add button.
2. Choose a language from the drop-down list. The drop-down list shows the language
directories you have added to the C:\PostOffice\Phrases directory.
3. Enter a description for the language. This description will appear elsewhere in the
graphical user interface, for example in the Extension Configuration window and
the AA tab in this screen. Click OK.
4. Repeat these steps for each language you want to add.
Configuring for a Multilingual System
MAXCS ACM 6.7 Administration Manual 99