Table of Contents
Advertisement
7. Check option 120.
8. Enter the IP address of your MAXCS server in the String value field.
9. Click Apply and OK. You'll see that the scope now shows option 120.
10. Right-click the scope option 120 and select Activate to activate the scope.
On the AltiGen IP Phone
The IP phone's System menu includes an item called Auto Discovery. The user can
select YES or NO for this menu item. The factory default is YES.
When you Upgrade Firmware
•
When you upgrade from firmware that does not support Auto Discovery, Auto
Discovery will be disabled by default.
•
When you upgrade from firmware that does support Auto Discovery, the Auto
Discovery setting will carry over.
When the user erases the IP phone configuration by using **2 [enter] in the IP
•
phone menu, Auto Discovery will be enabled by default.
Configuring Auto-Discovery of Server IP Address
MAXCS ACM 6.7 Administration Manual 229
Check option
120 and enter
the IP address
of your MAXCS
server in the
String value
field
Advertisement
Table of Contents
Troubleshooting
