Altigen ACM 6.7 Administrator's Manual page 396

Additional Steps for Bridged Access and Native VM Integration
1. In Recipient Configuration > Mailbox, select the user and select Enable Unified
Messaging from the Actions pane.
Figure 169. Here, Leslie Xia is an individual IP phone user with a mailbox in VMDOMAIN.
2. Click Browse and select the policy that is associated with the dialing plan you just
created, then click OK.
Figure 170. The policy associated with the dialing plan we just created is "LeslieXiaSS
Default Policy".
3. Enter the user's MAXCS extension number in the Manually entered mailbox
extension field (make sure the extension number is the same in MaxAdmin and the
Exchange User Mailbox).
382
MAXCS ACM 6.7 Administration Manual