Table of Contents
Advertisement
Configuring for Out Calling from UM
Figure 172. Setting the Dial Code
Outgoing Configuration:
•
Outside line access code - The trunk access code of your Softswitch
International access code - Toll call prefix for international calls. For the U.S.,
•
it is "011"
National number prefix - Toll call prefix for domestic calls, always set as "1"
•
•
Country/Region code - Country code. For the U.S., it is "1"
Incoming Configuration:
In-country/region number format
•
•
Use this field to specify how a user's telephone number should be dialed by the
UM Server in a different dial plan, but having the same country code. This is
used by an auto attendant and when an Outlook Voice Access subscriber
searches and tries to call the user in the directory.
This entry consists of a number prefix and n number of x characters (for
•
example, 020xxxxxxx).
•
To determine the telphone number, UM will append the last n-digits from the
telephone number that is specified in the directory to the prefix that is
specified.
•
International number format
Use this field to specify how a user's telephone number should be dialed by the
•
UM Server in a different dial plan, and having a different country code. This is
used by an auto attendant and when an Outlook Voice Access subscriber
searches and tries to call the user in the directory.
384
MAXCS ACM 6.7 Administration Manual
Advertisement
Table of Contents
Troubleshooting
