Table of Contents
Advertisement
3. Select line ID numbers from the Non-Member List and click the Add button to add
them to the Member List.
4. To assign extensions to a group, select the group, and then click the Configuration
button below the Member Extensions panel.
Figure 124. Configuring a Line Park group's member extensions
5. Select members for this Line Park group from the Non-Members list, and click the
Add button to move them to the Members list.
Members of a Line Park group can use their MaxCommunnicator or MaxAgent
applications to see and pick up calls parked for this group.
Any extension can park a call to any group. Any extension can pick up a call from
any group using #51 followed by the line park location, if allowed by MaxAdmin
configuration.
6. Configure the following Line Park options:
Park by System:
Play greeting phrase to caller when parked—Select this option to have the
•
system play the greeting phrase you select from the drop-down box, before
playing music on hold. Specify whether to play the greeting once only, or every x
seconds.
•
Play ring back tone to caller when parked—Select this option when you want
the caller to hear a ring back tone if the call has not been answered by any
extension or voice mail. If the call is answered and parked, the caller will hear a
greeting phrase and on-hold music.
•
Enable Timeout—When you check this box, a line park call will time out after the
number of seconds set in the value box. Use the Timeout forward to drop-down
boxes to route the call to an AA, voice mail, or an extension/group.
Park by Extension User:
•
Play greeting phrase to caller when parked—Select this option to have the
system play the greeting phrase you select from the drop-down box, before
playing music on hold. Specify whether to play the greeting once only, or every x
seconds.
Configuring Line Park
The name of the
selected group appears
here
MAXCS ACM 6.7 Administration Manual 261
Advertisement
Table of Contents
Troubleshooting
