When The Address Of The Softswitch Server Changes - Altigen ACM 6.7 Administrator's Manual

Figure 152. Monitoring the status and configuring the addresses of VM server and Enterprise
server

When the Address of the Softswitch Server Changes

Configure the new address on the VM server and the Enterprise server.
VM Server
If the address of the Softswitch is changed, you need to configure the new address on
the VM server so that the VM server can connect to the correct softswitch. Do this using
the Voice Message Server Utility. Run ...\AltiServ \exe\VMMonitor.exe to launch the
utility, shown in the following figure.
Click the Configure button beside the Current Server Address field to change the
address.
When the Address of the Softswitch Server Changes
MAXCS ACM 6.7 Administration Manual 361