Exchange Integration Configuration Steps - Altigen ACM 6.7 Administrator's Manual

3. After installation, add this user account to the Domain Admin group via Active
Directory Users and Computers (see Figure 158).
4. If MAXCS was already installed on the system, do the following:
f. Create a new domain user account, and add it to the Domain Admin group via
Active Directory Users and Computers.
g. Move the MAXCS server to the Domain.
h. Use the AltiPassword change utility (C:\AltiServ\Exe\AltiPwdChange.exe) to
change all AltiGen service accounts to run as this new user account.
Note:
In the future, if you need to debug you must log in to the MAXCS server with
this user account.
Figure 158. Add the user created by the MAXCS install program (or created by you in
step 4) to the Domain Admin group in Active Directory Users and Computers.

Exchange Integration Configuration Steps

After installation, perform the following steps.
1. Add Exchange Integration licenses to MAXCS (see Figure 159).
Exchange Integration Configuration Steps
MAXCS ACM 6.7 Administration Manual 375