Setting Parameters - Altigen ACM 6.7 Administrator's Manual

Figure 28. Softswitch Component Configuration window, Media Server/Gateway tab

Setting Parameters

To read or set parameters for a specific gateway, first select the gateway in the list on
the left. After making changes to a gateway, click Apply before selecting another
gateway. When you are finished with the window, click OK.
Parameter
ID/Name/Type
Status
Name
Type
Address
Password
Country
Description
Lists all gateways that have been added using the Add button in
this window.
Shows the status of the selected gateway: active, disconnected,
initializing, resetting, failed. (Read-only field.)
The name you gave the selected gateway for easy identification.
Shows whether this is a media server or gateway. If the ID is other
than 00, you cannot change the type in this configuration screen.
If you want to change the type, you need to delete the entry and
recreate it. You need to have sufficient Gateway or Media Server
Licenses in order to add an entry.
The IP address of the selected gateway.
The password assigned to the selected gateway. (Each gateway
has its own password.)
The country where the gateway resides. This configuration
determines what tone table will be used for the gateway.
Extension users assigned to this gateway will hear different off-
hook and busy tones, for example, if this parameter is set
differently from the MAXCS system setting.
MAXCS ACM 6.7 Administration Manual 73
Setting Parameters