Cisco 300 Series Cli Manual page 517

25
517
Use the no ipv6 nd inspection attach-policy
specific policy from the port.
Examples
Example 1—In the following example, the ND Inspection policy policy1 is attached
to the gi 1 1 port:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
Example 2—In the following example, the ND Inspection policy policy1 is attached
to the gi 1 1 port and applied to VLANs 1-10 and 12-20:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
1-10,12-20
switchxxxxxx(config-if)#
Example 3—In the following example, the ND Inspection policy policy1 is attached
to the gi 1 1 port and applied to VLANs 1-10 and the ND Inspection policy policy2 is
attached to the gi 1 1 port and applied to VLANs 12-20:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
Example 4—In the following example, ND Inspection detaches policy policy1 from
the gi 1 1 port:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)# exit
policy-name
interface gi11
ipv6 nd inspection attach-policy policy1
exit
interface gi11
ipv6 nd inspection attach-policy policy1 vlan
exit
interface gi11
ipv6 nd inspection attach-policy policy1 vlan 1-10
ipv6 nd inspection attach-policy policy2 vlan 12-20
exit
interface gi11
no ipv6 nd inspection attach-policy policy1
OL-32830-01 Command Line Interface Reference Guide
IPv6 First Hop Security
command to detach the