Sntp Anycast Client Enable - Cisco 300 Series Cli Manual

9
235
Parameters
•
day-of-the-week
effect. The second occurrence is the ending day the associated statement
is in effect. The second occurrence can be the following week (see
description in the User Guidelines). Possible values are: mon, tue, wed, thu,
fri, sat, and sun.
•
hh:mm
—The first occurrence of this argument is the starting hours:minutes
(military format) that the associated time range is in effect. The second
occurrence is the ending hours:minutes (military format) the associated
statement is in effect. The second occurrence can be at the following day
(see description in the User Guidelines). (Range: 0–23, mm: 0–59)
•
day-of-the-week1
list
effect.
Default Configuration
There is no periodic time when the time range is in effect.
Command Mode
Time-range Configuration mode
User Guidelines
The second occurrence of the day can be at the following week, e.g.
Thursday–Monday means that the time range is effective on Thursday, Friday,
Saturday, Sunday, and Monday.
The second occurrence of the time can be on the following day, e.g. "22:00–2:00".
Example
switchxxxxxx(config)#
switchxxxxxx(config-time-range)#
9.8

sntp anycast client enable

To enable the SNTP Anycast client, use the sntp anycast client enable command in
Global Configuration mode. To restore the default configuration, use the no form of
this command.
—The starting day that the associated time range is in
—Specifies a list of days that the time range is in
time-range http-allowed
periodic mon 12:00 to wed 12:00
OL-32830-01 Command Line Interface Reference Guide
Clock Commands