Cisco 300 Series Cli Manual page 591

25
591
VLAN IPv6 address
----- -----------
100 2001:300::1
100 2001:600::1
100 2001:100::2
200 2001:200::3
Field Descriptions:
•
VLAN—VLAN the host belongs to.
•
IPv6 address—IPv6 address of the host.
•
Inter—port the host is connected on.
•
MAC address—MAC address of the host.
•
Origin—Protocol that has added the IPv6 address:
•
Static—The static IPv6 address manually defined by the ipv6
neighbor binding static command.
•
NDP—The IPv6 address learnt from the NDP protocol messages.
•
DHCP—The IPv6 address learnt from the DHCPv6 protocol
messages.
•
State—Entry's state:
•
TENT—The new host IPv6 address is under validation. Since its
lifetime is less than 1sec its expiration time is not displayed.
•
VALID—The host IPv6 address was bound.
•
Expir. Time—Left time in seconds until the entry will be removed, if it is not
confirmed.
•
TCAM Ovrflw—Entries marked by '*' have not been added to TCAM
because TCAM overflow.
Inter MAC address
------- --------------
gi11 AABB.CC01.F500
gi11 AABB.CC01.F501
AABB.CC01.F100
gi12
AABB.CC01.F160
gi12
OL-32830-01 Command Line Interface Reference Guide
IPv6 First Hop Security
Origin State Expir
Time
------ ----- ------
NDP VALID 559
NDP
TENT
NDP
NDP
VALID 96
VALID 79
TCAM
Ovrfl
-----
*