Show Time-Range; Time-Range - Cisco 300 Series Cli Manual

Clock Commands
OL-32830-01 Command Line Interface Reference Guide

9.23 show time-range

To display the time range configuration, use the show time-range command in
User EXEC mode.
Syntax
time-range-name
show time-range
Parameters
•
time-range-name
Command Mode
User EXEC mode
Example
switchxxxxxx# show time-range
http-allowed
--------------
absolute start 12:00 1 Jan 2005 end
periodic Monday 12:00 to Wednesday 12:00

9.24 time-range

To define time ranges and to enter to Time-range Configuration mode, use the
time-range command to define time ranges and to enter to Time-range
Configuration mode in Global Configuration mode. To restore the default
configuration, use the no form of this command.
Syntax
time-range-name
time-range
time-range-name
no time-range
Parameters
•
time-range-name
characters).
—Specifies the name of an existing time range.
12:00 31 Dec 2005
—Specifies the name for the time range. (Range: 1–32
9
252