Show Bridge Multicast Address-Table Static - Cisco 300 Series Cli Manual

5
179
Multicast address table for VLANs in IPv6-GROUP bridging mode:
VLAN IP/MAC Address
---- ----------------- --------- ---------------------
8 ff02::4:4:4
Forbidden ports for Multicast addresses:
VLAN IP/MAC Address
---- ----------------- -----------
8 ff02::4:4:4
Multicast address table for VLANs in IPv6-SRC-GROUP bridging mode:
Vlan Group Address
---- --------------- --------------- -------- ------------------
8 ff02::4:4:4
8 ff02::4:4:4
Forbidden ports for Multicast addresses:
Vlan Group Address
---- --------------- ---------------
8 ff02::4:4:4
8 ff02::4:4:4
5.30 show bridge multicast address-table
static
To display the statically-configured Multicast addresses, use the show bridge
multicast address-table static Privileged EXEC mode command.
Syntax

show bridge multicast address-table static

show bridge multicast address-table static
mac-multicast-address] [mac| ip
Type Ports
Static gi11-2, gi13, Po1
Ports
gi14
Source address Type
* Static
fe80::200:7ff: Static
fe00:200
Source address Ports
----------
* gi14
fe80::200:7ff:f gi14
e00:200
]
OL-32830-01 Command Line Interface Reference Guide
Address Table Commands
Ports
gi11-2,gi13,Po1
[vlan vlan-id] [all]
[vlan vlan-id] [address