Show Ipv6 Dhcp Interface - Cisco 300 Series Cli Manual

14
349
switchxxxxxx# show ipv6 dhcp
The switch's DHCPv6 unique identifier(DUID)is 000300010024012607AA
Format: 3
Hardware type: 1
MAC Address: 0024.0126.07AA
Example 3. The following is sample output from this command when the switch's
UDID format is vendorbased on link-layer address and DHCPv6 Relay is
supported:
switchxxxxxx#
show ipv6 dhcp
The switch's DHCPv6 unique identifier(DUID)is 000300010024012607AA
Format: 3
Hardware type: 1
MAC Address: 0024.0126.07AA
Relay Destinations:
2001:001:250:A2FF:FEBF:A056
2001:1001:250:A2FF:FEBF:A056
2001:1011:250:A2FF:FEBF:A056 via VLAN 100
FE80::250:A2FF:FEBF:A056 via VLAN 100
FE80::250:A2FF:FEBF:A056 via VLAN 200

14.9 show ipv6 dhcp interface

Use the show ipv6 dhcp interface command in User EXEC or Privileged EXEC
mode to display DHCP for IPv6 interface information.
Syntax
show ipv6 dhcp interface [
Parameters
•
interface-id —Interface identifier.
interface-id ]
OL-32830-01 Command Line Interface Reference Guide
DHCPv6 Commands