Dot1X Auth-Not-Req - Cisco 300 Series Cli Manual

2
802. 1 X Commands
switchxxxxxx# show running-config
.
.
.
dot1x page customization
data ********
exit
.
.
.
2.5

dot1x auth-not-req

Use the dot1x auth-not-req Interface Configuration (VLAN) mode command to
enable unauthorized devices access to a VLAN. Use the no form of this command
to disable access to a VLAN.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Parameters
N/A
Default Configuration
Access is enabled.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
A VLAN cannot be defined as an unauthenticated VLAN if it is an access VLAN or it
is the native VLAN for some ports.
49 OL-32830-01 Command Line Interface Reference Guide