Show Ipv6 Neighbor Binding - Cisco 300 Series Cli Manual

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide
vlan-default 1-4094
Attached to ports:
Policy Name
port-default
Example 3—The following example displays the user defined policies:
switchxxxxxx#
show ipv6 nd raguard policy
policy1
policy2

25.76 show ipv6 neighbor binding

To display Neighbor Binding global configuration, use the show ipv6 neighbor
binding command in Privilege EXEC configuration mode.
Syntax
show ipv6 neighbor binding
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This displays Neighbor Binding global configuration.
Example
The following example gives an example of the show ipv6 neighbor binding
command output:
switchxxxxxx# show ipv6 neighbor binding
Ports
gi11-4
25
VLANs
1-4094
586