Show Ip Route Summary - Cisco 300 Series Cli Manual

IP Routing Protocol-Independent Commands
OL-32830-01 Command Line Interface Reference Guide
Code IP Route Distance/ Next Hop
Metric
------ ------------------- ----------- ---------------
S> 10.16.2.0/24 110/128 10.119.254.244 00:02:22 vlan2
S> 10.16.2.64/26 110/128 100.1.14.244
S> 10.16.2.128/26 110/128 110.9.2.2
S> 10.16.208.0/24 110/128 120.120.5.44
S> 10.16.223.0/24 110/128 20.1.2.24
S> 10.16.236.0/24 110/129 30.19.54.240

23.4 show ip route summary

Use the show ip route summary command in User EXEC or Privileged EXEC mode
to display the current contents of the IP routing table in summary format.
Syntax
show ip route summary
Parameters
N/A.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
This command is only relevant in router mode.
Example
The following is sample output from the show ip route summary command:
switchxxxxxx# show ip route summary
IP Routing Table Summary - 90 entries
35 connected, 25 static
Last Time Outgoing
IP Address Updated Interface
------------- -----------------------
00:02:22 vlan1
00:02:22 vlan3
00:02:22 vlan2
00:02:22 vlan5
00:02:23 vlan6
23
472